| Classification |
Dimensions
(A) |
Dimensions of top tape extension
(B) |
Dimensions of bottom tape extension(C) |
| Closed-end zipper |
From the top end of
the slider to the tip of the bottom stop |
From the top stop to the to the tip
of notches of the cut end
 |
From the bottom stop
to the tip of notches of the cut end |
|
| Zipper with double sliders (arranged
in head to head relation) |
From the tip of one
bottom stop to the tip of the other bottom stop |
From the upper bottom stop to the tip
of notches of the cut end
 |
From the tip of the
bottom stop to the tip of notches of the cut end |
|
| Zipper with double sliders (arranged
in bottom-to- bottom relation) |
From the top end of
one slider to the top end of the other slider |
From the top stop to the tip of notches
of the cut end
|
Same as the top tape
extention end portion |
|
| Open-end zipper |
From the top end of
the slider to the tip of the box |
From the top stop to the cut end
 |
|
|
| Two way separator |
From the top end of
the slider to the bottom end of the supplementary
tape |
From the top stop to the cut end
 |
|
|
| Top open zipper |
From the top stop to
the tip of the box |
From the top stop to the
cut end
|
|
|
| Reversible slider |
Rather than from the
top end, measurement should be made from the shoulder
inlet portion of the slider |
From the top stop to the
cut end
 |
|
|
| When the top stop does not enter the
slider |
Measurement should
be made from the top stop |
From the top stop to the tip of notches
of the cut end
 |
|
